RAK-PRECIOUS

1) Wipe off dusts/dirt from the surface of the product on regular schedule.
2) Dilute 100 ml of commercial degreasing agent (for example: Super Cryzal-70 Multi Action Cleaner) to 5 liters of clean water.
3) Apply and wipe over the surface with the use of cotton cloth or sponge. Rinsing is not necessary.

1) Wipe off dusts/dirt from the surface of the product.
2) Use undiluted commercial degreasing agent (for example: Super Cryzal-70 Multi Action Cleaner).
3) Apply and rub over the surface with the use of cotton cloth or sponge.
4) Rinse thoroughly with clean water and wipe with dry cotton cloth.

1) Wipe off dusts/dirt from the surface of the product.
2) Depending on the type of surface (polished or natural) and stain, use undiluted specialized cleaning agents such as FABER 30, FILA Deterdek or FILA PS/87 or other brands of cleaning solutions.
3) Spread the solution over the affected surface and leave for approximately 3-5 minutes or longer, to allow cleaning reaction. It is recommended to clean initially a small visible section of the product and examine the result if suitable, before proceeding to clean the full area.
4) Rub the solution over the affected surface with the use of cotton cloth or sponge. Use scouring pad, if the marks or stains persist.
5) Rinse thoroughly with clean water and wipe with dry cotton cloth.
6) Repeat steps 2 to 5 if necessary.

Cleaning and maintenance program depends essentially on the density of use and the nature of dirt to which the product is exposed. Thus, routine cleaning and maintenance must be performed according to specific requirements.
The performance of a product is limited to such an extent. Any spillage of tea, coffee, paint, permanent marker, hair dye and the like on the tiles must be immediately cleaned to prevent severe staining. It is possible that these substances may leave light mark or slight discoloration on the tiles if not immediately cleaned.
It is not advisable to use hydroflouric acid solution or its compound for cleaning.
Do not use metal tools to scrape the dirt from the surface of the product.